How to Get Rid of Car Mold? Mold is not only very unpleasant in the industry; you should also remove it as quickly as possible in the car. You can find out how to do it correctly and how you can prevent mold formation in the future in our home article.
What is mold actually?
When mold is spoken of colloquially, it usually means the so-called mold fungus. However, contrary to its reputation, this one has several good qualities that can help people. The mold can be used, among other things, for the production of the following products:
- Enhancement of food:The so-called noble mold is used to give cheese or salami a special taste, for example. The vegetarian meat substitute Quorn is also made from parts of a mold.
- Viticulture:If a specific type of mold occurs at the right time, it can enhance the harvest.
- Production of antibiotics:The all-purpose weapon penicillin is produced by metabolites of moulds.
How to Get Rid of Car Mold? In addition to the unpleasant odor, the fungus can also cause health problems. We will go into this in more detail later in the guide and explain how you can prevent a disease caused by mold.
The dealer may pay a commission for links on this page, e.g. for wither green underlining.
Remove mold - that's how it works in the car
Mold can form in a variety of places on your car. We explain how to remove it on the different surfaces.
How to Get Rid of Car Mold? The best way to remove mold on your car seats or other upholstery is to use a fabric anti-mold agent. Make sure it doesn't contain chlorine or hydrogen peroxide. Both of these substances can stain your seats and upholstery.
The best way to combat mold on plastics is to use a chemical anti-mould agent. Then wipe the surfaces with a damp cloth and make sure that everything dries.
Tip: Pure alcohol is also suitable, but it is highly flammable and should therefore only be applied to cold surfaces and protected from the sun. You can get it at the pharmacy.
Note: In what conditions should we go to the workshop?
How to Get Rid of Car Mold? Especially in older cars, you may find mold where the window meets the door. However, this is only a small part; there is usually more behind the paneling. Therefore, you should remove the door panel and fight the mold there as well.
If your ventilation or air conditioning system becomes moldy, you will notice this from the unpleasant smell. In that case you have to go to a workshop. The mold spores can get into your respiratory tract particularly easily via the ventilation. Therefore, professional cleaning is essential.
Remove mold in the car - tips and tricks
Avoid mold in the car - tips
How to Get Rid of Car Mold? Once you've got rid of the mold in your car, you should do everything you can to prevent it from returning. With the following tips, you will most likely succeed.
Keep your interior as dry as possible. Moisture in the car is the main reason for mold growth. You should therefore always open the doors or windows when you have to stand still for a long time so that your vehicle remains well ventilated.
Wet clothing should not be left in the car longer than necessary, as it also increases moisture levels. Take out and dry floor mats that are soaked from your shoes after your ride. A dehumidifier can also be useful for your car.
Mold and Moisture in the car
How to Get Rid of Car Mold? If you have a mold problem, you should act quickly, because mold spores are harmful to your health. Mold in the car often forms in fabric fibers such as car seats, carpet, and headliner or on the leather steering wheel and gear knob.
Remove mold in the car - 3 steps
If you have mold in the car, it is not enough to simply clean the interior. To remove mold in the car , several cleaning stages and air neutralization are necessary.
This is the only way to restore the vehicle to a perfect condition that is no longer harmful to health.
Steps 1 – Remove mold from car
How to Get Rid of Car Mold? In order to remove the visible surface mold, a basic cleaning with enzymes is carried out. The surface cleaning is supplemented by dry ice cleaning of the entire interior.
This also eliminates mold in inaccessible regions such as the ventilation duct and other narrow slots and edges.
Stage 2 – Ozone Treatment to Eliminate Mold Spores
Fresh air filters and cabin filters cannot be cleaned and are therefore replaced with new filter inserts. This ensures that mold spores are not redistributed. Air ionization (also called ozone treatment) is used to eliminate mold spores in the air.
For this purpose, the vehicle is flooded with ozone and spores and bacteria in the air are permanently killed.
Stage 3 - Sealant to protect against new mold:
How to Get Rid of Car Mold? After cleaning, all interior surfaces and fabrics (leather seats, fabric seats, and plastics) are resealed to ensure long-lasting protection against other bacteria.
However, the mold is also characterized by a number of negative properties. These become particularly clear when a building suffers from mold; food is spoiled by the fungus or when a driver notices that mold has formed in the car.
How does mold develop in cars?
How to Get Rid of Car Mold? Mold in cars is usually caused by moisture in the interior. If the vehicle is then also rarely moved, the mold can spread excellently in the car.
After removing mold, the causes of the ingress of moisture should always be investigated and eliminated. Thanks to years of experience in removing mold from cars, we know the most common causes very well and can advise you in detail here so that you are spared mold in the future.
Prices for mold removal in the car
How to Get Rid of Car Mold? Mold removal takes about 2 working days and varies depending on the mold load and vehicle size.
After a vehicle inspection, we will provide you with a cost estimate free of charge and without obligation. You will therefore receive the best price, specially tailored to you and your vehicle.